Aeternitas - gold earrings with diamonds

41,700.00 Kč

Aeternitas means eternity in Latin – and in ancient myths it is the name of the goddess who guards infinite time, rebirth and immortality. In these earrings, her story is written in metal: organic lines subtly suggest the infinity symbol, and the gold surface is enlivened by the sparkle of tiny diamonds.

Aeternitas' modern earrings are designed to be both striking and timeless - worn alone as a statement piece or paired with rings from the same collection to create a complete set. They are perfect for special occasions or as an everyday reminder of your own cycles, stories and new beginnings.

I make each pair for you to order in white, yellow or rose gold. You can choose the stones according to your wishes and budget – natural diamonds and lab-grown diamonds. Do you crave color? I will be happy to offer you sapphires in the entire color palette, or other precious stones that will match your style and personal story.

In the basic version, the earrings are set with a mix of several stone sizes, which together create the effect of a subtle but intense sparkle. If you would like a different composition or stone size, I will prepare an individual design and calculation for you.

The production of earrings takes approximately 4 weeks from the time of ordering and the finished jewelry may differ slightly from the photo because I create each piece by hand and tailor-made for a specific client.

Aeternitas - gold earrings with diamonds

Details & Specifications

585/1000 au / 14kt gold

pair approx. 6.20 g

Natural diamonds, LabGrown diamonds, Synthetic moissanites.

Fitting (pair of earrings):
4 × 1.40mm
6 × 2.00mm
4 × 3.00mm

Quality: Sl1 / EF

Made to order, usually 2-4 weeks from order

Přehled velikostí

Size overview

The right size is the basis of comfort. If you are not sure, feel free to write to me - I will be happy to advise you, and for custom-made jewelry, we will fine-tune everything together before production.

Ring size

How to find out your ring size at home

Option A: measure a ring that fits you (recommended)

Take the ring you wear on the same finger.
Measure the inner diameter (not the outer) in millimeters.
Please refer to the table below to find the appropriate size.

Option B: measure your finger (circumference) with a piece of paper/string

Wrap a piece of paper or string around your finger where the ring normally fits.
Mark the overlap point and measure the length in millimeters.
In the EU/CZ the following applies: ring size = circumference in mm (e.g. 54 mm = size 54).

Important tips for getting the right size

Ideally, measure in the evening (fingers tend to be swollen during the day).
Do not tighten the paper too much – the ring must pass comfortably over the joint.
For wider rings (approx. 4 mm and more), I often recommend choosing 0.5–1 size larger .

Recommendation: Ring Sizer app

If you want a quick and accurate measurement, I recommend using the Ring Sizer app (on iOS / Android). It allows you to easily compare the size to a ring you already have, or to measure the diameter in millimeters as a guide. For best results, measure with a ring that fits the same finger.

Tip: If you are not sure between two sizes, write to me - I will be happy to advise based on the type of ring and the width of the band.

If you are "between" two sizes, generally choose the larger one - especially for rings that are wider or have a more pronounced profile.

Bracelet size

The bracelet can fit snugly , comfortably , or loosely – it's mainly a matter of preference.
The quickest way is to measure your wrist circumference and add a margin.

How to measure your wrist

Wrap a piece of paper/tape measure around your wrist where you will wear the bracelet.
Measure the circumference in cm.
Add a margin according to your wearing style:

Tight fit: +0.5 to +1.0 cm
Comfort fit (recommended): +1.0 to +1.5 cm
Loose fit: +1.5 to +2.0 cm

Example: wrist circumference 15.5 cm
→ comfortable bracelet approx. 16.5–17.0 cm

For solid bracelets (bangle) or distinctive pieces, the size can be decided individually - write to me and I will advise you.

Chain and necklace lengths

The length of the necklace affects where the jewelry “fits” on the body. Below are approximate lengths:

38–40 cm: close to the neck (choker)
42–45 cm: classic collarbone length (most universal)
50 cm: slightly lower, below the collarbone
55–60 cm: significantly lower, elegant layering
70+ cm: long chain (often over the head)

How to choose the right length

Take the string and try it on your neck at the desired length.
If you plan on layering, a combination of e.g. 40 + 45 + 50/55 cm works beautifully.
For a pendant, a length of 42–45 cm may work best, but it depends on the shape of the pendant and the neckline.

Stone sizes: mm, ct and what it means

For diamonds and gemstones, it is often stated:

dimension in mm (e.g. 4.0 mm)
weight in carats (ct) (e.g. 0.25 ct)

Quick reference for round diamond

The values are approximate - the weight is also affected by the height of the stone and the specific cut.

3.0 mm ≈ 0.10 ct
3.5 mm ≈ 0.15–0.17 ct
4.0 mm ≈ 0.25 ct
4.2 mm ≈ 0.28–0.30 ct
4.5 mm ≈ 0.35 ct
5.0 mm ≈ 0.50 ct

If you are choosing a custom stone, I will be happy to send you options based on your preferred size, budget, and appearance (natural/lab-grown, color, quality).

Custom manufacturing and size adjustment

For custom jewelry, always before production:

We will confirm the size together.
we will agree on the fit (tight / comfortable / loose)
and for the stones we will choose the ideal combination of size, color and character

If you are not sure, write to me - just send:

for a ring: size or diameter of the ring in mm
for bracelet: wrist circumference in cm + fit preference
for a necklace: the desired length in cm (or a photo of where you want to place it on your body)

Do you need advice?

Send me a message and I will recommend the ideal size and length for you.

Make an appointment

You might like

Every day is like a diamond

Made in Prague

Modern jewelry

Transparent materials

Account